Wheel Paint – Satin Black – 3 in 1 product – 4 liter kit

Key Features: 

• Full Etch to Bare Metal or prepared coatings with Minimal Preparation. 
• Covers up to 180 grit sanding marks. 
• Long Lasting. 
• High gloss finish with full UV protection. 
• Time and cost-saving product requiring
• No Primer or Top coat such as a clearcoat 
• Easy Application in 2 coats for a full-color change

Benefits

• Non-isocyanate—Improved health and safety 
• Easy to apply due to the product being designed and manufactured for application to alloy wheels. 
• Spray gun pot life is up to 8 hours when stored in either the pot of the spray gun or a PPS container. 
• Fantastic gloss levels that do not fade over time 
• Tough durable finish that looks like the original powder-coated finish.  

Available in three colors: Black, Satin Black, or Bright Silver

Mixing Ratio

Preparation
Ensure all surfaces to be coated are dry and free from any grease and other contamination

Application
Shake cans well before use. Use conventional spray application. to a dry film thickness of 20-30 microns in two coats. Flash off fully to matt between coats (typically 3 mins). We recommend a substrate temperature between 15 and 25 C. Flash off for 5 mins before curing.

Pot life
Approx. 7 h at 20⁰

Drying time
Cure for 15-20 mins at 60˚C substrate temperature IR Curing: 10 15 mins @20cm distance using 1KW lamp. Allow to cool to ambient temperature before exposing to external environment.

Coverage
12.5 m2 per mixed litre (assuming 100% transfer efficiency) at 25 micron dry film thickness.

Storage
at least 1 years in original and unopened containers